BoatSafe.com
Home Boating Courses Boating Tips Safety Links Ship's Store Search

spacer

Marlinespike - Types of Rope Construction

Types of Rope Construction

Rope is constructed in two basic ways, laid and braided, although there are variations on the theme.

The first is "3 strand" line. The direction of twist is called the lay of the rope. Three strand twisted line can be "laid" right or left, and should always be coiled with the lay of the line. This rope is described as S-laid (left-laid) or Z-laid (right-laid) according to whether the twist follows the line of the center part of the letter S or Z. Most three strand rope is Z-laid (right-laid). If you hold a length of 3 strand, right-hand laid twisted line at arm's length and eyeball it, you will see the wrap of the line twisting to the right.

The construction of stranded line, whether natural or synthetic, is much the same. Individual fibers are twisted into yarns, the yarns are twisted into strands and the stands are twisted into line. Right-laid is twisted clockwise and left-laid is twisted counterclockwise. The fibers are twisted in the same direction as the strands, however the yarns are twisted in the opposite direction. This right, left, right for right-laid line helps give strength, keep the line from kinking and hold its shape.

The other construction type is braided line. This type of line does not stretch to the degree that twisted line does, and is more difficult to splice. However, it goes through a pulley or block very well because of its rounded shape, and is stronger than its equivalent-sized twisted line. Braided line also tends to snag when used as docking line if the pilings are rough.

A variety of braided lines are available:

< Previous: Introduction/Index

Next: Rope Materials >

spacer
BoatSafe.com
Home Page

spacer
Home Boating Courses Boating Tips Safety Links Ship's Store Search

Copyright 1996/2016 Nautical Know How, Inc. All rights reserved.
Privacy Policy
Standard Disclaimer
Contact Us